BGD 526 Wet Abrasion Scrub Tester Abrasion and Washability Tester na

Description

BGD 526 Wet Abrasion Scrub Tester Abrasion and Washability Tester 110 V/220 V
Attention: Please contact us about the input voltage which you need when you place a order.
YouTube Operation Video:
https://youtu.be/yD3Wa2ExGq0
Introduction:
The coated surface (coating film) needs to be evaluated for its scrub resistance by brush, sponge or other means. Therefore, there is
a need for a precision instrument that produces a repeatable, controlled condition to simulate the wear pattern that the film faces
every day. The
w
et
a
brasion
s
crub
t
ester
can effectively evaluate the scrubberabilit
y
and
Washability
of
the film and affect the anti-
wear properties of the paint. It can also be used to evaluate the performance of the detergent by means of a reproduction test.
This is the latest multi-functional
w
et
a
brasion
s
crub
t
ester
that is compatible with a wide range of domestic and international
testing standards. These instruments are rugged and versatile, and are designed to withstand abrasion, wash, brush and impedance
properties in a variety of materials including pigments, paints, inks, coatings, leather, wood, plastics, printed materials, fabrics and
more.
Features:
1. Running speed can be set to meet requirements of different standards.
2. With four-digit counter, start the machine and it will automatically be stopped when reaching set times.
3. Compatible with a variety of abrasion pads to comply with different standards requirements, such as ISO, ASTM, DIN etc..
4. Quickly and easily to load and unload testing samples and replacing abrasion head.
5. Can work normally under different voltage and frequency
6. With stable and uniform running speed because of Push-rod design
7. Two brush holders for side by side testing
8. Long service life with hard and durable design
9. The whole machine body is made of anodized aluminum, having stable working status, repeatable test results, no exception even in the
fastest speed of the stroke.
10. With peristaltic pump design, control scrub medium flow accurately.
Main Technical Parameter:
1. Specification of brush: Nylon brush bristles in 5/4 pattern extending 19 mm from block.
2. Weight of brush (including device holding brush): 454±10 g (ASTM D 2486)
3. Stroke Length: 300 mm
4. Frequency of travel: 5~95 times/min(adjustable)
5. Range of count:  0~9,999 times
6. Size of test plate: 430×150×0.03 mm
7. Power of motor: 25 W
8. Power: 110 V/ 220 V; 50/60 Hz
9. Overall size: 500×460×280 mm
10. Capacity of Water Container: 1 L